| CAM Software |
one for all - DeskCNC can be used for our cnc foam cutting machines and foam milling machines. No other software beside a CAD program is needed to contol the machines.
DeskCNC was manufactured to run up to 4 axes at the same time. The fourth axis can either be a round axis or a linear axis.
DeskCNC has a CAM mode, G-Code Editor and the machine mode.
foam cutting - in the CAM mode you can open, scale, rotate and move any DXF, HPGL or PLT file. You can change the cutting direction and the start and exit point. After you have generated the cutting path save it as an ISO-G-CODE file. The cutting gap can be set and will be calculated by DeskCNC automaticly.
The cutting file can be cutted directly in the machine mode or it can be edited in the G-Code Editor.
milling - in the CAM mode you can open, scale, rotate and move any DXF, HPGL or PLT file. You can change the milling direction of any region and choose the milling mode. After you generated the milling path save it as an ISO-G-CODE file.
The milling file can be executed directly in the machine mode or it can be edited in the G-Code Editor.
The following milling modes are available:
- Contour milling,
- Pocket milling,
- 3D milling,
- Engraving,
- drilling.
Other functions:
- 3D scanning with the optional available TP-100 3D Scanner,
- Picture to milling convertion,
- PCB milling,
- Rings engraving with the 4D rotary table,
- lathe work.
highlights
- Machine your part directly from Windows
- runs smoothly on windows (XP recommanded).
- Toolpath updated in real time and in 3D.
- Fast Block Processing (over 300 Blocks/Sec).
- True Linear Acceleration Ramp (programmable)
- True 3 axis interpolation.
- Continuous Motion Contouring.
- up to 8 outputs,
- PWM output for the heating wire controll.
- 3D ISO-GCode Editor.
- file support: DXF, Hpgl, PLT and others.
Download your DeskCNC demo here. | |
|
